ssh to a pi zero w from a linux box

There are many sites and YouTube videos explaining how to connect the pi zero to a laptop or desktop using a USB cable, then access the pi zero from the laptop using ssh. Here is a link to one guide.

I followed a guide on YouTube but had a few problems connecting to the pi zero w using ssh through Linux. Each time I put in:

ssh pi@raspberrypi.local -p22

I got a blank line which then timed out and displayed:

ssh: Could not resolve hostname raspberrypi.local: Name or service not known

I successfully connected to the pi zero w using putty on a Windows 8 machine. Putty is ssh with a nice GUI interface. Windows is ‘plug and play’. I run Linux without a GUI, so have ‘plug, learn and play’ instead. Time to learn.

I fired up nm-applet, using the command:

nm-applet

Then I went to ‘Edit connections’. The pi zero w will often be the highest numbered ‘Wired connection’. In my case it was ‘Wired connection 2’. Edit this. Go to the IPv4 Settings tab. Select Link-Local Only for the method. See a screenshot showing the setup below.

Raspberry pi zero w ssh connection configuration

After saving the updated configuration, the ssh command works.

Booting a new Lenovo Thinkpad from USB stick to use Clonezilla

All I wanted to do was boot from my trusty Clonezilla USB stick to make a system back up of my shiny new Thinkpad X260. Long story short, you need to disable the ‘Secure Boot’ option in the UEFI (what used to be called BIOS) to boot from a bootable Clonezilla USB stick.

 
I bought the X260 a couple of month’s ago. This is last year’s model, so I got it at a discount. Usually I’d buy a 2/3 year old Thinkpad and replace the drive and keyboard, but found I could buy a new laptop, albeit last year’s model for about half of what it would’ve cost a year ago. A quick cleansing of the OS by installing Linux Mint. The usual kerfuffle to configure the system and remember how to partition the drive, then try to remember how to mount said partitions. Time to make an image of the OS partition. I’ve learned this is a good idea the hard way. When I tried to boot from my Clonezilla USB sticks, none of them would work! Somehow I had made a bootable USB stick that would install Linux Mint. I spent a good hour before checking on the ‘Secure Boot’ option in the UEFI screen, which by default is Enabled. Flicking this to Disabled solved this issue. 
 
Now I have an image of my OS on an external drive for when I manage to destroy the installation. Not if. When. Still, that’s how we learn, by breaking and fixing. Probably a good thing that I don’t work in medicine.

Installing linux mint 18.1 onto a Lenovo 260 with an encrypted home drive

The simplest way I found to install Linux Mint 18.1 on to my Lenovo 260 with an encrypted home drive and a separate installation partition is to install the system using the simplest options, then afterwards encrypt your home drive and shrink down the installation partition using gparted. The rest of this post is how I failed to do this several times. Which is undoubtedly due to my lack of linux wisdom.
 
I tried and failed to install Linux Mint 18.1 on to custom partitions for my root, home and swap. The system would not boot after I completed the installation. I could not install grub to the /mnt partition to fix this. I tried some stackoverflow solutions with no joy.
 
So I did a simple install, clicking on the option to encrypt the home folder. Then I used gparted on the installation USB stick to shrink down the partition. However, my swap space was also encrypted, which I understand increases security. Every time I booted I was presented with message asking for a non-existent password to mount the encrypted swap space. No real issue, I just hit enter and carried on to the regular login screen. Then I tried updating the system. For each update I had to press enter to mount the encrypted swap space. A little tedious. So I went on stack overflow, found a ‘fix’ and rendered the system unbootable. This was getting a little tedious.
 
So I again installed Linux Mint 18.1 from my USB stick. This time I chose the vanilla, easiest options, no encryption. I used the instructions here to encrypt my home drive. I used the installation stick to run gparted and shrink down the partition. So now I have Linux Mint installed on a partition and an encrypted home drive.
 
Simple. Hind sight always is.